Not seen a pic thread for a while so thought I would do one with a twist.
SS Bikes but the frame must be designed for (conventional) gears and thus have a gear hanger.
Any type of bike for any purpose will do. From rigid to FS.
Show me them.
[img]
[img]
The second photo is an old Giant Stonebreaker. I had horizontal dropouts put on it but kept the original gear hanger just in case and now have an old Campag triple groupset on it.
Before & After shots
[img]
🙂
I said conversions not convictions!
;-0
[img]
Excuse the his and hers photo but its the only one I have of the bike geared up @ the moment.
[img]
With gaylord gearing on 32:17 and in its element using an eno eccentric rear hub!
[img] 
[/img]
Only two?
[img] 
[/img]
Done using an eccentriker BB.
In it's original incarnation about 4 years ago....
[img]
And as it was last built up when owned by me about 3 years ago (and yes I had stopped because the saddle had shifted)....
[img]
[IMG]
My old inbred in SS mode
[img]
My old Handjob, just before it got replaced by an 853 'Bred:
[img]
Before the dropout/chainstay snapped.
[img]
After - new dropouts by Alves
[img]
Complete bike.
[img] 
[/img]
mine 😀
[IMG]
Andyhilton WINS the ugliest bike award for this week!
and its only tuesday. 😉
I wouldn't be so sure have you seen the last Kona?
1994 Rock Lobster. I think this was magic ratio in this pic, but it's got an On-One doofer on at the moment. Used for kiddie seat rides now.
[img]
I848.PHOTOBUCKET.COM 
I848.PHOTOBUCKET.COM my 97 cone converted firstly as magic ration but when that was not so magic I used a DMR chain tensioner...
[IMG]
[IMG]
[IMG] 
[/IMG]
I now have problem with the tensioner as I cannot get enough tension on the chain whether it is above or below the chain. Do I need to change the chain length?
Nope the tension seeker name is aspirational, it seeks tension and fails lol
I had one, i replaced it with a bolt up type without spring.
did its first race last night and performed admirably
[img]
[img]
[img]
[/img]" title="FARM3.STATIC.FLICKR.COM" rel="nofollow" target="_blank" >
[/img]"
LH3.GGPHT.COM Just built this earlier today and gave it a very wet first Pentands outing earlier:
[img]
Last time I ran a singlespeed was also a geared conversion, however it's back to gears now:
[img]
